Decorative Wall Coverings for Non-Shower Bathroom Areas
For a non-shower bathroom wall, choose between broad embossed PVC lengths and a smooth PU gel square grid. The actual formats are 1.22m × 50m and 30.5cm square, both with waterproof and moisture-proof features. Use the wall layout, exposure, joints and cleaning needs to choose the sample, then order in complete rolls or pieces.
Two Formats for a Defined Decorative Wall
Relia Wallpaper gives this shortlist two actual formats: embossed PVC wallpaper 18237, 1.22 m × 50 m at 0.20–0.30 mm listed thickness, and smooth PU gel 19632, 30.5 cm square at 1.3 mm. Their published minima are one roll and ten pieces, with bathroom decoration included in their current descriptions.
The roll offers broad continuous lengths; the square creates a repeating sheet grid. Choose by the visible wall and edge layout, not only the word waterproof. The roll's embossed marble/wood design and the tile's marble/brick-look mosaic are distinct finishes that need their own approved reference.
| Decision | 18237 embossed PVC | 19632 PU gel |
|---|---|---|
| Format | 1.22 m × 50 m roll | 30.5 cm square |
| Listed thickness | 0.20–0.30 mm | 1.3 mm |
| Surface /construction | Embossed design; PVC | Smooth; PU gel |
| Published minimum | 1 roll | 10 pieces |
| Layout role | Broad drops /lengths | Repeated square grid |
Define the Water Exposure at the Proposed Position
Mark the decorative area relative to the basin, bath, shower and plumbing. Describe humid air, occasional splashes or more direct water contact, and record the actual wall condition, joints and edges. Both selected products list waterproof, moisture-proof and mould-proof functions. Use those features to shortlist the finish while the local installer resolves the receiving wall and any required wet-area construction separately.
Use Small Pieces to Study the Joint Pattern
Place adjoining PU gel squares together at the proposed basin zone, corner or fitting. Compare the actual outside boundaries with the mosaic lines inside the face. Select the design image and sample behind Multi or labels 1–8, then approve a complete square and joined pair. That makes the small-piece choice specific to the supplied format rather than an attractive isolated tile detail.
Map Corners and Fixtures Before Counting Material
For an illustrative 2.44 m-wide, 1.22 m-high decorative rectangle, the 30.5 cm grid is eight sheets across and four high: 32 pieces before joint and cut-out adjustments. The exact rectangle contains 2.9768 m². A small fitting opening may still require cutting a complete sheet, so do not deduct its area without locating it on the grid.
For the wide roll, two 1.22 m widths span the same field. If a 1.30 m cut length is assumed to include trimming, two cuts use 2.6 linear metres before matching. These are alternative geometric examples, not approved installation details for the actual site.
- Example field: 2.44 m × 1.22 m
- Gel grid: 8 across × 4 high = 32 pieces
- Locate fittings and actual cut-outs
- Roll alternative: 2 widths × 1.30 m assumed cut
- Reconcile matching, edges and spares separately
Check the Embossed Film Under the Room Lighting
Open enough of the embossed PVC roll to see its actual marble/wood-design direction under the bathroom lighting. Pair the Multi selection with the chosen reference image and specify the version within the listed 0.20–0.30mm range. Its water/moisture/mould-related features and one-year warranty remain product-specific. The approved sample, wall position and seam plan complete the decorative choice.
Agree Cleaning and Surface Preparation Together
Obtain preparation and care information for the selected finish together. Record the actual wall, proposed cleaner and method, then evaluate the face and edges on a representative sample or offcut. Normal wiping and stronger chemicals are different requirements.
The visible decorative face and the adhesive side perform different jobs. Industry adhesive science distinguishes initial contact behaviour from other performance requirements. The face’s water-resistance description therefore belongs with, rather than replaces, the surface, exposed-edge and application information for the chosen bathroom position.
- details
- Actual finish, repairs and selected application instructions
- details
- Requested method, representative sample and observed finish/edge result
Quote Rolls and Tiles as Separate Lines
Order the selected roll and gel material as separate lines. In the illustrative grid, the 32-sheet requirement is above the gel product's ten-piece minimum, but carton contents are not published. Ask how that actual piece quantity will be supplied; do not round it to an invented box size.
The wide-roll minimum is one 50 m roll, containing 61 m² nominally. The example's 2.6 linear metres of cuts does not create a smaller published sales unit. Keep the site's initial use, any agreed spares and the purchased complete roll distinct so the offer matches the actual supply format.
| Line | Published minimum | Illustrative layout versus purchase |
|---|---|---|
| 18237 PVC roll | 1 roll of 1.22 m × 50 m | 2.6 m initial cuts; purchase complete rolls |
| 19632 PU gel | 10 pieces | 32-piece example grid; actual packing toquote |
Layout figures exclude final join, motif and cut-out adjustments; not an actual order.
Keep the Approved Finish Linked to the Sample
Keep the approved sample with the final elevation, actual surface and care information. For PU squares, retain the selected design and adjoining-sheet result; for the roll, retain thickness, pattern direction and seams. Compare incoming samples with the requested appearance, dimensions, edges and instructions. Review the application again if the wall finish or exposure changes so the approved scope stays identifiable.
Send a Bathroom Decoration Supply Brief
Send the measured non-shower area, selected product and design, intended water exposure, existing wall finish and located fittings. Include the proposed grid or drop plan, requested rolls or pieces, cleaning requirements, destination and any project documents you need.
Relia Wallpaper is a China-based factory business you can approach with this specific bathroom-decoration brief. Ask for sample, packing and current supply terms on each line. A reply tied to the actual decorative area lets you choose a finish and order unit while the local installer resolves the site's preparation and wet-area construction requirements.
- Defined wall position and exposure
- Approved roll or gel design
- Measured drawing and actual surface
- Roll/piece quantity and cleaning requirements
- Destination, documents and packing reply
Send Your Bathroom Decoration Layout
Send the non-shower elevation, selected roll or gel design and actual wall finish. Include fittings, expected water contact, cleaning needs and the rolls or pieces required, plus destination, so the material and application reply can follow the same defined decorative area.
Send these details with your enquiry
- Measured non-shower area, fittings and expected water or cleaning exposure.
- Selected design, thickness and proposed grid or drop plan.
- Actual wall finish, requested rolls or pieces, destination and packing needs.
- details
- Qingdao Relia wallpaper Co., Ltd.
- details
- Shuyuan Road, Qingdao, Shandong, China
- details
- [email protected]
- details
- +86 18561762631
- details
- 14042030971