Source Removable Floor Stickers for Future Replacement
For a floor you may replace later, start with a genuinely removable product and a trial on the base that will remain. Our 60cm marble-look square and embossed wood-look plank provide two such PVC routes. Choose the format and current gauge, then assess installed fit and removal separately before applying the selected product’s carton and minimum-order conditions.
| Procurement decision | Separate record |
|---|---|
| Installed finish | Square/plank, design and gauge |
| Future operation | Local replacement or full removal |
| Underlying floor | Material and finish that must remain |
A Marble-Look Square for the Shortlist
Relia Wallpaper can discuss two removable PVC routes for your existing floor. The marble square is60 ×60cm ×1.5mm,packed28 per carton,with a200m² minimum and actual Multi/1.5mm selection. It lists anti-scratch,waterproof and mould-proof features.
The embossed wood-look plank is91.4 ×15.2cm,packed36 per carton. Current selections use1.5mm;the broader1.5/2mm description does not establish every2mm design combination. Keep separate order lines.
Define the Result You Want at Replacement
Define what replacement means for this project. You may want to lift one damaged piece, replace a whole temporary finish, or restore the exposed floor to a particular condition. Those are different acceptance tasks. Removable describes the product route, but does not by itself promise residue-free removal, no change to the old finish or reuse of lifted pieces. Put the desired result into the sample brief in practical terms: which underlying finish must remain, what visible change would be unacceptable, and whether local replacement or complete removal is the intended operation.
| Desired outcome | Acceptance evidence |
|---|---|
| Lift a damaged piece | Removal method and surrounding-edge condition |
| Remove the whole finish | Exposed-base observations |
| Insert a replacement | Fit and appearance beside retained field |
| Reuse lifted material | Separate requirement; not established here |
A Wood-Look Plank with Its Own Format
Choose the plank when its grain and direction suit the room. Retain the actual named or numbered appearance and current1.5mm selection;request2mm separately if needed. Embossed,anti-scratch,waterproof and eco-friendly descriptions help identify the product,but removal still needs assessment on the intended base.
Describe the Floor That Will Stay Underneath
Record the base material,coating,repair condition,joints and any moisture or instability. Photograph the trial area beforehand. Use the selected product’s preparation,application and removal guidance. A sound area with one coating cannot represent a weaker or differently finished area elsewhere,so choose a base relevant to the actual installation.
Agree a Relevant Trial Before Bulk Purchase
Agree the trial outcome and review points before applying the sample. Record the product,base,preparation,application date and exposure conditions. Check fit and edges,then remove a piece by the relevant instructions and photograph the exposed base. For local repair,also assess a new piece beside the retained field. No universal trial duration is stated;an immediate corner lift does not represent later use.
- Identify product and representative base
- Record preparation and application
- Review installed edges and appearance
- Remove a test piece by relevant instructions
- Record base condition and replacement result
Compare Formats without Losing the Removal Requirement
Compare the square grid and directional plank layout with the later repair in mind. A small damaged area can still need a larger matching purchase. If local repairs matter,choose a project-specific reserve from the approved supply and record its room allocation and storage guidance. This is planning,not a promise of indefinitely available matching batches.
Keep Their Carton and Minimum-Order Bases Separate
Use the real packing quantities when estimating that reserve. An illustrative 56-square purchase is two 28-piece cartons and 20.16m² of nominal material. An illustrative 144-plank purchase is four 36-piece cartons and about 20.01m². These near-equal areas do not make the buying terms equal: the square’s stated minimum is 200m², while the plank record gives no MOQ. Nor do the figures include cut losses or retained spares. Keep installed need, trial material, reserve and commercial minimum as four separate lines before deciding whether either route suits a small temporary project.
| Illustrative purchase | Nominal material | Source minimum |
|---|---|---|
| 56squares /2 cartons | 20.16m² | Square minimum 200m² |
| 144planks /4 cartons | 20.005632m² | PlankMOQnot listed |
| Quantity plan | Cuts and reserve separate | Do not confuse small area with accepted order |
Keep the Chosen Finish and Use Plan Together
Keep the accepted product sample and trial result with the design,gauge,room and replacement objective. At receipt,check identity,finish,edges and carton counts before installation. Retain supplied batch information and identify unused material by installed area. Compare any later supply beside the existing finish before buying the full repair quantity.
Bring the Replacement Brief into the Quantity Enquiry
Send an RFQ that states the chosen square or plank, actual option, installed area and expected replacement operation. Attach the floor description and trial outcome or request the sample needed to obtain one. Separate the required pieces from the proposed carton quantity and identify the square’s 200m² minimum when it applies. Ask the offer to return the product-specific instructions, packing and commercial terms. This gives us a defined replacement brief while letting your team make the practical decision about acceptable removal and later maintenance on the real base.
Define the Floor Replacement You Intend
Send your chosen removable floor reference, base description and whether the task is local repair or full removal. Add the trial observations or sample needed, then separate installed pieces, spares and proposed cartons in the quantity request.
Contact Qingdao Relia wallpaper Co., Ltd. Address: Shuyuan Road, Qingdao, Shandong, China.
Phone: +86 18561762631. Email: [email protected].
WhatsApp: 14042030971.
Send these details with your enquiry
- Selected removable product,appearance and gauge.
- Floor base,removal objective and relevant trial observations.
- Installed need,reserve and proposed cartons with destination.
- Choose square or plank
Retain the actual design and gauge.
- Describe the base
Identify the finish intended to remain.
- Set the trial outcome
Installed fit, removal and base condition.
- Request the quantity offer
Keep reserve and minimum terms separate.