Furniture Films for Mixed Existing Surface Types
For a mixed batch of old furniture, choose a small finish shortlist but approve it separately on paint, laminate and any retained film. Start with wood-look or marble-effect wide rolls where their design and width fit; add silver only where the brief needs it. Let accepted surface groups and cut lists determine the purchase, rather than buying all three finishes first.
- record
- Identify the coating and its condition
- record
- Identify the facing and exposed edges
- record
- Identify the layer that will actually receive the new film
A Small Finish Range Can Start with Three Actual Products
Relia Wallpaper's China-based factory business offers three self-adhesive furniture films with online technical support and graphic design. Wood-look PVC is 1.22 × 50m with 0.29mm listed thickness; marble-effect PVC/vinyl is 122cm × 50m; silver embossed PVC/vinyl is 60cm × 100m.
Choose the desired appearance, then assess that candidate across the actual surface groups. Keep another finish where it solves an accepted visual or use requirement, rather than buying one film for each old coating by default.
Identify the Actual Receiving Layer
Give each group an identifier, part count, dimensions and edge detail. Record the actual top layer: retained or newly prepared paint, laminate with any exposed core, or old decorative film that will stay or be removed. Include defects rather than only the sound centre.
The new adhesive bonds to the layer left behind. Loose paint or a weak old-film bond remains part of the assembly, so inspect the sample's centre and edge through that chain before judging the new film alone.
Use the Wood-Look Film as a Defined Candidate
The grey embossed wood-look PVC film names cabinet and door-skin uses, with waterproof, moisture-proof, mould-proof and eco-friendly features. It starts at one roll and lists a one-year warranty, online technical support, graphic design and cross-category consolidation.
Keep the same selected product and sample while comparing the prepared groups. This makes differences in receiving finish or preparation visible without changing the decorative material at the same time.
Decide What Stays Before Testing Adhesion
Inspect the existing face and proposed edge path with the local applicator. Record loose or lifting layers, contamination and any repair or removal that changes the receiving surface. Obtain preparation instructions for the exact film before specifying a primer or cleaning chemical.
Original technical film guidance distinguishes the substrate from finishes such as paint, varnish or laminate and requires cured, sound receiving coatings. Use that principle to define the trial layer. Do not use another film's primer, solvent, adhesion threshold or curing duration as instructions for these products.
- Identify the actual topmost finish
- Record the agreed keep/remove preparation
- Describe the surface that remains
- Obtain instructions for the selected film
- Trial that same prepared layer
A Nine-Cell Trial Plan Does Not Assume Nine Passes
Three films across three surface groups create nine possible trial combinations. Test representative parts only for the combinations you intend to buy, recording film, receiving layer, preparation, edge and observation conditions for each.
Use the results to narrow the purchase list. A film accepted on several groups can simplify stock, while failed or unresolved groups remain outside that acceptance. Reassess a part if preparation exposes a different receiving layer.
| Receiving group | Wood-look | Marble-effect | Silver embossed |
|---|---|---|---|
| Painted finish | Separate trial record | Separate trial record | Separate trial record |
| Laminate finish | Separate trial record | Separate trial record | Separate trial record |
| Prepared former-film face | Separate trial record | Separate trial record | Separate trial record |
Nine planned combinations if all are needed; no results are implied.
The Silver Route Has Its Own Exposure and Order Scale
The embossed silver film uses peel-and-stick installation and offers oil-proof, waterproof, moisture-proof and mould-proof functions. Include the actual wiping routine and returned edge when trialling a high-touch cabinet group.
Its minimum is two 60cm × 100m rolls per colour, or 120m² nominal. Wood starts at one nominal 61m² roll; marble starts at one nominal 61m² roll per design. Let the accepted part schedule determine which commitments the project needs.
Allocate Stock Only to Accepted Surface Groups
Illustrative batch: forty painted, thirty laminated and twenty previously filmed faces, each 50 ×80cm before returns. Ninety faces represent 36m² nominal face area. Buying all three candidate minima would represent 61+61+120=242m² nominal, although that is neither the cut requirement nor a finished yield.
This comparison explains why the trial should narrow the product range before the stock commitment. Attach each approved surface group to its accepted film and actual cut schedule, then calculate complete roll purchases. Unresolved parts should not be included as accepted demand merely to justify a minimum.
| Illustrative allocation | Quantity basis | Buying decision |
|---|---|---|
| 40painted+30laminated+20former-film faces | 90 ×0.50 ×0.80=36m² faces | Returns and cuts still needed |
| All three candidate minima | 61+61+120=242m² nominal | Not the recommended purchase automatically |
| Accepted final schedule | Surface group →film →cut quantity | Buy only against accepted combinations |
Keep the Marble Pattern with Its Own Cut List
The marble-effect PVC/vinyl film is 122cm × 50m with waterproof, moisture-proof, mould-proof and anti-static functions. Fix the chosen code and vein direction for its accepted surface groups; obtain this product's thickness if the process requires it.
Keep the part photograph and sample with the surface approval. If later removal exposes a different layer, update the receiving-surface and cut allocation before continuing with that group.
A Refacing RFQ Built Around Surface Groups
Send the original-finish groups, photographs, part counts and dimensions with the desired decorative references. Specify the actual prepared layer that will receive each film and attach the accepted trial conditions, or identify which combinations still need samples. Give the final cut requirement and proposed roll quantity by product.
All three products provide online technical support. Request the corresponding preparation and application instructions, packing and actual supply terms. This lets a material supplier answer for specific products without being described as your local furniture-repair or installation service.
Send the Surface Groups and Accepted Finish
Send the receiving-layer groups, selected film and accepted trial record to Qingdao Relia wallpaper Co., Ltd. Include part counts, cut dimensions and which old layers will remain so the material enquiry follows the prepared furniture. We are at Shuyuan Road, Qingdao, Shandong, China. Contact us directly below to send the schedule.
Send these details with your enquiry
- Surface groups, topmost prepared layers, defects, part counts and dimensions.
- Desired films and accepted trial combinations, with preparation and edge conditions.
- Cut requirements and rolls by product, unresolved groups, packing and destination.
- Includes
- Actual topmost layers and keep/remove decisions · Accepted finish and surface-specific trials · Part cuts, roll allocation and destination
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971