Wood-Look Foam Grille Rolls for Interior Walls
For a flexible wood-grille wall covering, start with the actual smooth vinyl/PE foam rolls in a 60 × 300cm format. Both references are self-adhesive and peel-and-stick. Choose the grain, colour and direction, then compare the wall’s cutting demand with the published opening minimum of 120 rolls for each selected design.
Begin with the Standard Roll Specification
Relia Wallpaper's references 19602 and 19590 both identify smooth vinyl/PE-foam construction in a standard 60 × 300 cm roll. Use those actual products to compare the grille appearance and flexible material with your wall scheme. Keep a standard order separate from any changed-size request, which needs its own supplied specification and terms.
No thickness is published in these descriptions. If the profile or edge must meet neighbouring trim, request that measurement for the selected product. Do not import the 2.3 mm figure from an IXPE/PET tile or the 1 mm material gauge from a PVC panel merely because all are wall decorations.
| Field | 19602 /19590 standard basis |
|---|---|
| Construction | Vinyl +PE foam |
| Surface /installation | Smooth; self-adhesive peel-and-stick |
| Standard format | 60 cm × 300 cm |
| Published MOQ | 5 cartons = 120 rolls/design |
| Thickness /profile | Not listed; request selected-product measurement |
| Size change | Customization described; quote separately |
Compare Grain and Grille Rhythm at Room Scale
Use an opened roll to compare grain direction, stripe rhythm and colour at wall scale, with an edge sample showing the flexible construction. Approve the actual catalogue image rather than the selector’s catalogue-request wording. The wood-look appearance supports a decorative choice; acoustic treatment, impact resistance or structural replacement needs its own specification rather than following from the grille pattern.
Set the Pattern Direction Before Planning Cuts
Set the pattern direction on the elevation before calculating rolls. For an illustrative 3 m-wide, 2.7 m-high wall, five 60 cm widths span the field before seam adjustment. Assuming a 2.8 m cut including trimming, each standard 3 m roll supplies one full-height piece, so the initial layout uses five rolls.
Those rolls contain 9 m² nominally against an 8.1 m² net wall. The difference reflects that illustrative cutting geometry, not a universal spare percentage. An actual motif, seam arrangement or opening can change the plan. Mark the approved grain direction so usable offcuts are not assumed to work after rotation.
- Example wall: 3 m wide × 2.7 m high
- 60 cm widths → 5 full-height pieces
- Assumed 2.8 m cut → 1 piece per 3 m roll
- Initial layout: 5 rolls before pattern/joint adjustment
- Record direction, cuts and agreed spares
Keep Ordinary Surface Features with the Chosen Product
Both products list waterproof, oilproof, moisture-proof and mould-proof features with living-room, gallery, hall and restaurant uses. Connect the selected roll to the actual surface, preparation, exposed edges and required care method.
Industry lamination combines materials and converting establishes the final width and length. Keep the approved face, foam description and 60 × 300cm format together. A similar grille image does not identify the same construction or buying unit, and a decorative roll does not by itself establish a structural or acoustic assembly.
- Industry route: specified face and foam
- Bond the selected layers as a composite
- Convert to the agreed roll dimensions
- Approve wood direction, edges and supplied unit
The actual product features remain waterproof, oil-proof, moisture-proof and mould-proof; substrate, edges, preparation and care remain selected-product application inputs.
Examine the Roll Edge and Material Feel
Inspect the face and edge against the approved design, standard dimensions and any separately quoted profile measurement. Review an adjoining pair to see how grille lines meet at the material boundary. Trial the selected roll on the prepared receiving surface using its instructions and retain the face, join and edge result as your buying reference. This is a buyer evaluation method rather than an included factory testing service.
Plan the Opening Buy by Design
The published minimum is five cartons equalling 120 rolls per design for each reference. At 60 × 300 cm, one design's minimum contains 216 m² nominally. If an opening assortment uses two different designs under that same basis, it starts at 120 rolls of each: 240 rolls and 432 m² nominally, not 120 mixed rolls.
Keep the selected design on every quotation row. If you want a smaller or mixed starter order, request that as a commercial exception and wait for its actual terms. The existing minimum should not be silently reinterpreted to fit a proposed assortment.
| Buying plan | Published-basis roll count | Nominal material |
|---|---|---|
| 1 selected design | 120 rolls in 5 cartons | 216 m² |
| 2 separate designs | 120+120 = 240 rolls | 432 m² |
| Mixed/smaller request | Separate terms required | Not established by 120 rolls/design |
Separate Nominal Area from the Wall Quantity
A standard roll contains 1.8m² nominally. In the illustrative 3m × 2.7m wall, five 2.8m cuts use five rolls, leaving 0.2m per roll before other losses. The rolls contain 9m² against an 8.1m² net wall; that difference comes from the assumed cutting layout. Keep this initial five-roll demand separate from the 120-roll-per-design wholesale minimum and any separately agreed spares.
Distinguish a Standard Design from a Size Request
Describe a size change separately from a standard-design order. Size customization is accepted for enquiry, but the proposed width or length needs its own sample, supplied specification, minimum and packing. State whether grain scale, direction and adjoining appearance must stay the same. Approve that changed version against the decorative target before replacing the standard reference in the order.
Request a Wood-Grille Roll Supply Reply
Send the selected standard reference, actual catalogue design, wall elevation, pattern direction and requested rolls per design. Include the existing surface, edge and trim requirements, destination and sample information you need. Ask for the unlisted thickness or profile measurement where it affects installation.
Relia Wallpaper is a China-based factory business you can approach with this defined grille-roll brief. Put any width or length change on a separate request with its own approval and terms. The useful outcome is a product-specific roll order, not an undefined request for a lightweight substitute for every timber or acoustic grille application.
Send Your Wood-Grille Roll List
Send the actual catalogue design, roll quantities per design and measured wall plan with the grain direction marked. Include destination, surface and edge requirements, and put any changed width or length on its own line so the standard and adjusted requests stay clear.
Send these details with your enquiry
- Actual catalogue design and requested rolls for each design.
- Measured wall, grain direction, substrate and required edge or profile information.
- Destination and any separate width or length customization request.
- details
- Qingdao Relia wallpaper Co., Ltd.
- details
- Shuyuan Road, Qingdao, Shandong, China
- details
- [email protected]
- details
- +86 18561762631
- details
- 14042030971