Full Decorative Film Rolls for Local Slitting
For local retail slitting, buy the full roll against the smaller sizes you intend to sell. Start with the 122cm × 50m wood-grain or marble-effect reference, then choose a cut plan that preserves its design. Compare theoretical output with your workshop trial before ordering; the existing 45cm brown roll is a separate ready-sized product, not the same design already converted.
| Parent-roll reference | Supplied format | Minimum |
|---|---|---|
| Wood-grain PVC | 1.22 ×50m; 0.29mm listed thickness | 1 roll |
| Marble-effect PVC/vinyl | 122cm ×50m; thickness not stated | 1 roll/design |
A Defined Wood-Grain Parent-Roll Product
Relia Wallpaper's China-based factory business offers the dark wood-grain decorative PVC roll in 1.22 × 50m format with 0.29mm listed thickness. It is embossed and self-adhesive, with waterproof, moisture-proof, mould-proof and eco-friendly features.
It starts at one roll with a one-year warranty, online technical support, graphic design and cross-category consolidation. Evaluate that actual decorative roll against your local workshop requirements before treating it as converting feedstock.
Two Finished-Size Plans from the Same Nominal Width
Illustrative plan A: split a 122cm ×50m parent into two 60cm widths, leaving 2cm across the width before actual trimming restrictions. Divide each strip into 5m lengths: two strips ×ten lengths gives twenty theoretical 60cm ×5m rolls. Actual usable width, ends, joins and local process loss can reduce the output.
PlanB instead targets 45cm ×10m rolls. Two 45cm widths use 90cm, leaving 32cm; five 10m lengths on each strip give ten theoretical finished rolls. These are alternative plans, not simultaneous outputs from one parent. Choose the retail sizes before purchasing the material.
The Marble-Effect Roll Needs Its Own Structure Record
The marble-effect PVC/vinyl roll is 122cm × 50m, self-adhesive and peel-and-stick, with waterproof, moisture-proof, mould-proof and anti-static functions. It starts at one roll per design, with actual codes 6718 and 2 through 6.
Fix the selected image before dividing the veining. Obtain the thickness and construction information needed by your equipment for this product, then retain it separately from the wood film's 0.29mm specification.
The Receiving Specification Must Fit the Workshop
Obtain usable width, supplied length, edge condition and relevant joins. State required core, winding direction, maximum roll dimensions and receiving tolerances. Keep decorative face, adhesive and liner information separate where the workshop needs them. The 2cm nominal remainder in plan A makes actual usable width important.
Plan the local sequence from width acceptance through slitting, length measurement, rewinding and retail identification. Rewinding forms the finished roll; it adds no usable width or lost motif. Agree the core, winding and pack requirements for that local operation.
- Define supplied material
Accepted design, construction/liner information, usable width, edge trim, supplied length and relevant joins.
- Slit the selected plan
Choose either the 60cm or 45cm lane plan; preserve the pattern within each lane.
- Measure and rewind locally
Trial finished length and losses against required core, winding direction, equipment roll-size limits and agreed receiving tolerances.
- Identify retail units
Retain parent identity and agree local packaging/labels; keep converting responsibility separate from full-roll supply.
Slitting Preserves Only the Pattern Inside Each Strip
Overlay strip lines on the complete grain or marble image. Inspect the pattern inside each finished width, especially strong veins near the cut, and set direction before allocating a narrow remainder.
Use the selected design to decide whether strips need sequencing or identification; no exact repeat is supplied for these rolls. Keep theoretical output separate from actual trial count, dimensions and rejected material when measuring local yield.
- Fix the actual product and complete design
- Overlay the intended finished-width lines
- Inspect each strip's visible grain or vein
- Preserve accepted direction and any sequence
- Record actual trial output, rejects and remainder
An Existing Small Roll Is a Different Supply Route
The ready-sized Brown stripes/plaid wallpaper is a separate 45cm × 10m self-adhesive PVC product with 0.1mm stated thickness, waterproof, moisture-proof and mould-proof functions. It starts at 30 rolls with plastic-film packing.
Compare it when that Brown design suits the retail range. A smaller supplied roll of the dark wood or cream marble design needs its own offer; this ready-sized listing establishes a different product.
Compare a Trial Parent Roll with a Ready-Sized Minimum
One nominal 122cm ×50m parent contains 61m² of face area. The ready-sized Brown product's 30-roll minimum represents 30 ×0.45 ×10=135m² nominal. The two figures explain the purchase scale, while the parent-roll plans show how much of its width may become the retail size you actually want.
Keep wood and marble parent rolls on separate design lines, and request a trial roll using your receiving specification. Measure the resulting finished roll count and dimensions locally before committing to a wider range. Do not treat graphic design or consolidation capability as a confirmed slitting service.
| Route | Minimum | Nominal area / trial decision |
|---|---|---|
| Wood parent roll | 1 roll | 61m²; local trial against plan |
| Marble parent roll | 1 roll/design | 61m²/design; construction reply needed |
| Existing Brown 45cm ×10m | 30 rolls | 135m² nominal; different actual design |
Separate Material Supply from Converting Tasks
Your local plan allocates slitting, rewinding, finished-size identification, retail packing and dimensional checks. Retain the original full-roll identity with the finished units so the material used remains identifiable.
If supplier involvement is required, list cutting, core changes, rewinding or packing as separate requested services with target sizes and quantities. Keep them in the local plan until an actual scope and offer reallocates that work.
A Parent-Roll RFQ with a Finished-Product Target
Send the exact wood or marble product, accepted design and parent-roll quantity with your target finished widths, lengths and output per design. Attach the cut-plan assumptions, pattern direction and equipment requirements. State usable-width, core, winding and construction details needed before the trial roll is accepted.
All three references list online technical support. Ask for the actual material specification and supply offer, with any converting request on its own line. This makes it clear whether you are buying parent rolls to process locally or asking for already converted retail products.
Send the Parent-Roll and Retail-Size Brief
Send the selected full-roll reference, target retail sizes and local converting requirements to Qingdao Relia wallpaper Co., Ltd. Identify the material-supply fields separately from your workshop's winding and packaging tasks. Our address is Shuyuan Road, Qingdao, Shandong, China. Use the direct links below to enquire about the chosen roll.
Send these details with your enquiry
- Actual wood or marble design, full-roll quantity and target finished widths and lengths.
- Required usable width, construction/liner, core, winding direction and equipment limits.
- Accepted pattern plan, trial needs and any separately requested converting or packing services.
- Includes
- Actual parent-roll design and construction · Chosen finished widths, lengths and pattern plan · Trial needs, parent-roll quantity and destination
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971