Office Glass Films for Meeting-Room Privacy Briefs
For meeting rooms, choose a film from the detail you need to obscure and the daylight you want to retain. Compare glue-free frosted static cling with self-adhesive reeded PET, then place the actual pattern over the relevant sightlines. Set the band or full-pane coverage from a two-sided sample view before ordering the accepted width and gauge combination.
Frosted Static Cling and Reeded PET Solve Different Briefs
Relia Wallpaper's China-based factory range includes both films with online technical support. Frosted film lists No Glue/Static, embossed or frosted/etched appearance and a nominal 90cm × 50m format. Reeded PET is self-adhesive and removable in a 152cm × 50m format.
Record the actual glass and any coating, including Low-E surface location, for product-specific compatibility guidance. Request the frosted line's design or onsite services by scope and location in the offer so the support matches the overseas project.
| Candidate | Mounting | Nominal format | Selection emphasis |
|---|---|---|---|
| Frosted film | No Glue/Static; not self-adhesive | 90cm ×50m | Actual frosted/clear pattern and cling conditions |
| Reeded PET | Self-adhesive; removable | 152cm ×50m | Reeded direction, appearance and removal conditions |
Set the Privacy Band from the Actual Sightlines
Mark table, screens, corridor approach and seated/standing views on the glass elevation. Define the detail to obscure, then choose band or full-pane coverage around those sightlines.
An illustrative band from 80 to 160cm above finished floor is 80cm high. Adjust that example to the room and actual pattern. Surface treatment and band position are separate: transparent stripes can remain a viewing path even inside the decorated zone.
- Mark table, screen and corridor positions
- Identify the detail that must be obscured
- Draw the proposed band or full-pane coverage
- Example band: 80–160cm above floor=80cm high
- Adjust and approve using actual two-sided views
Evaluate the Reeded Finish in Both Directions
The reeded PET film offers decorative, heat-insulating, waterproof, eco-friendly, privacy-protection and removable features. Actual design choices are 1 through 4, with 0.10/0.12mm thickness descriptions. Select the finish and actual gauge together.
Place the sample in the intended orientation and view both sides at the meeting-room distances. Record which outlines and details remain visible under the relevant corridor and artificial-light conditions.
Quote One Actual Material, Size and Gauge Combination
The frosted specification includes PVC and PVC/PET material descriptions, 0.18/0.20mm thickness, 60/90/120cm widths and 2/5/20/50m lengths alongside its nominal 90cm ×50m format. Choose an actual supplied combination rather than assuming every material, width, length and gauge can be ordered together.
The reeded reference lists PET, 152cm ×50m and 0.10/0.12mm thickness descriptions. Its actual selector is the design code, so the quote should identify the gauge and full format explicitly. Keep the installation method with those fields; the glue-free product and adhesive PET product are not merely two textures of one film.
- value
- 90cm ×50m; No Glue/Static
- value
- Widths 60/90/120cm; lengths 2/5/20/50m; 0.18/0.20mm
- value
- Actual PVC or PVC/PET version to quote
- value
- 152cm ×50m; selected 0.10/0.12mm and design 1–4
Clear Bands Matter to the Privacy Decision
The pictured frosted-stripe sheet includes transparent bands. Review the whole pattern, locating any clear strip at seated-eye or screen height rather than judging only one frosted patch.
Place it against the proposed coverage line under the light on both sides. Record the information that remains legible and the detail that becomes acceptably unclear; that observation is the useful target for this room.
A Coverage Calculation Helps Define the Order
Illustrative twelve 90cm-wide panes, each needing an 80cm-high band, require 12 ×0.90 ×0.80=8.64m² of nominal band area. If a 90cm roll width spans each pane and the pattern direction is accepted, twelve 80cm lengths consume 9.6 linear metres before cutting and edge allowances.
The reeded PET minimum is one roll per model, with 76m² nominal face area at 1.52 ×50m. The frosted product does not state a minimum, so request the selected format's order basis. A shorter described frosted length is worth asking about for a small room, but its actual combination and supply terms still need an offer.
| Planning item | Illustrative or listed basis |
|---|---|
| Privacy-band need | 12 ×0.90 ×0.80=8.64m² |
| 90cm width across each pane | 12 ×0.80=9.6m length before allowances |
| Reeded PET minimum | 1 roll/model; 1.52 ×50=76m² nominal |
| Frosted order basis | Minimum not stated; quote the selected format |
Approve Visibility and Brightness on the Actual Glass
Keep an adjacent clear area while comparing the two samples from meeting and corridor positions. Use representative daylight and artificial lighting, then record the accepted privacy and remaining brightness.
Photograph original glass marks before application. Judge the selected film at the agreed application/inspection interval so existing defects and initial application appearance are separated from the accepted finished result.
Use the Listed Support Without Assuming Local Installation
The frosted product lists a three-year warranty, online support, onsite installation/training/inspection, free spare parts and return/replacement services. It also lists graphic design, 3D model design, project solutions and cross-category consolidation. Identify the services required and obtain their location, eligibility and scope for this order; an overseas job is not automatically an arranged local installation.
The reeded PET film has a two-year warranty, online support, graphic design and cross-category consolidation. The frosted listing also includes an explosion-proof function; where security is a purchasing requirement, obtain the selected film-and-glass-system evidence rather than treating decorative privacy acceptance as a safety classification.
A Meeting-Room RFQ with a Visibility Target
Send the pane schedule, glass specification and proposed band or full-pane coverage. Attach the selected frosted or reeded sample, pattern direction, top/bottom heights and accepted two-sided visibility record. Include design, gauge, roll format and the calculated quantity with cutting allowances shown separately.
Request the actual minimum, packing, application instructions and any chosen support service in the offer. The useful purchase specification identifies both the material and the sightline result it must be assessed against, without promising a measured privacy or daylight level that has not been established.
Send the Meeting-Room Glazing and Visibility Brief
Send the glass schedule, selected frosted or reeded reference and accepted sightline view to Qingdao Relia wallpaper Co., Ltd. Include band heights, glass type and the required roll combination. We are at Shuyuan Road, Qingdao, Shandong, China. Email the drawing or use a direct link below for a product-specific privacy-film enquiry.
Send these details with your enquiry
- Pane schedule, actual glass/coating and the detail that must become unclear.
- Selected film, pattern direction, band heights and accepted two-sided sample view.
- Actual material/gauge/roll combination, cut quantities, requested support and destination.
- Includes
- Glazing type, panes and sightline target · Accepted film pattern, band and gauge · Cut quantities, support request and destination
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971