Glossy Foam Wall Coverings with PVC and PET Surfaces
For glossy foam wall coverings, compare the complete composite rather than selecting PVC or PET by name alone. Our actual choices include a 120 × 300 cm gold-mirror PVC face on IXPE foam and 30 × 60 cm marble-look PET-faced IXPE tiles. Use the surface, format and order-unit comparisons below to choose a product that fits your decorative scheme.
- Identify the actual glossy face
- Record foam and other stated layers
- Compare format, design and listed thickness
- Approve the complete sample
- Quote the correct carton/piece minimum
A Gold-Mirror PVC Surface on IXPE Foam
Relia Wallpaper’s gold-mirror composite combines a glossy PVC surface with IXPE foam in a 120 × 300cm format, with 2.2–2.5mm listed thickness and a five-carton minimum per design. It lists waterproof, moisture-proof, mould-proof, antistatic, sound-absorbing and heat-insulation functions, plus a five-year warranty. Compare this complete reflective product with the smaller PET-faced marble tile rather than ranking the surface polymers alone.
Compare Complete Products Alongside the Surface Name
PET-surface reference 18212 is a 30 × 60 cm glossy white/warm-gold marble-look tile, 2.3 mm thick. The gold PVC reference is a much larger 120 × 300 cm format. Appearance, colour, format and thickness therefore change together; these two items are not a controlled experiment proving one surface polymer better.
A dimensional example makes the choice concrete: one 120 × 300 cm unit contains 3.6 m², the same nominal area as twenty 30 × 60 cm tiles. A four-by-five grid of the smaller tiles spans that rectangle before joint adjustments. The number and position of material boundaries are part of the purchase decision.
| Reference | Actual composite /finish | Format /listed thickness | Nominal material |
|---|---|---|---|
| 19296 | Glossy PVC face +IXPE; gold mirror | 120 × 300 cm; 2.2–2.5 mm | 3.6 m²/unit |
| 18212 | Glossy PET face +IXPE; marble look | 30 × 60 cm; 2.3 mm | 0.18 m²/tile; 20 tiles = 3.6 m² |
| 19037 additional tile | PVC/PE/XPE descriptions +backing paper | 30 × 60 cm; 2.5 mm | 0.18 m²/tile; gloss not listed |
A Glossy Marble Tile in a Smaller Format
The glossy PET-faced IXPE tile has a white/warm-gold marble appearance, 30 × 60cm format and 2.3mm thickness. It lists a 1,200-piece minimum, three-year warranty and water/moisture/mould-related, antistatic, sound-absorbing and heat-insulation functions. Approve a full tile and joined pair with the pattern direction. Keep its stated PET/IXPE construction intact rather than adding another product’s aluminium or paper layer.
Set the Finish Criteria for Your Sample
Set sample criteria around what the buyer needs to choose: colour, reflection, pattern, texture, edge condition and the appearance of adjoining material. Compare the actual products under the intended lighting, while recognising that gold mirror and marble print are different decorative effects.
For a cleaning requirement, obtain the selected product's care instructions and evaluate the proposed method on a sample or offcut. Record the method and visible result rather than assuming PVC or PET alone establishes scratch resistance, stain removal or chemical compatibility. The decision should approve the finished composite you can buy, not a general ranking of polymer names.
Name the Layers That Belong in the Order
Write each complete construction on its quotation line with design, format and listed product thickness: PVC/IXPE for the gold product, PET/IXPE for the marble tile, and the additional tile’s own PVC/PE-XPE/backing-paper description. Obtain exact sequence, individual layer thickness or adhesive details only where the buying requirement needs them.
Industry lamination joins layers into a composite; a facing name alone does not allocate the finished thickness or establish its bonding recipe. Approve the complete sample and edge rather than filling those fields from another product.
- Industry route: select the facing and foam
- Join the specified layers into the composite
- Convert to the supplied format
- Approve complete construction, finish and edge
Quotation inputs still retain only stated layers, the listed product thickness, actual format/design and any separately required adhesive or individual-layer information.
Keep the Additional PVC Composite Tile Distinct
The additional 30 × 60cm, 2.5mm PVC/PE-XPE tile is a distinct rectangular composite with backing-paper wording. Its gloss is not specified, so use it as a construction comparison rather than a confirmed glossy candidate. It lists 240 pieces per carton, a five-carton minimum and one-year warranty. Those terms do not define packing or liners for the PET-faced product.
Keep Carton and Piece Minimums Comparable
Compare the order commitments in their actual units. The gold PVC/IXPE product starts at five cartons per design, but carton contents are not published. The PET/IXPE tile starts at 1,200 pieces, equal to 216 m² nominally, without a stated carton count.
For 19037, five cartons × 240 pieces also gives 1,200 pieces and 216 m² nominally. That numerical equality does not make the constructions or packing identical. Ask for the missing gold-unit and PET-tile carton information before comparing total shipment contents. Keep design-specific minima visible rather than adding unrelated designs to reach one combined number.
| Reference | Published minimum /packing | Nominal material at minimum |
|---|---|---|
| 19296 PVC/IXPE | 5 cartons per design; contents unlisted | Cannot calculate without units/carton |
| 18212 PET/IXPE | 1,200 pieces; carton contents unlisted | 216 m² |
| 19037 PVC/PE-XPE | 5 cartons × 240 pieces | 1,200 pieces; 216 m² |
Approve the Whole Composite Reference
Retain the approved face, foam, other stated layers, format and thickness with a full-pattern image, edge view and adjoining result. Compare sample identity, dimensions, surface and edge against that record. Attach any required performance evidence to the exact composite. Keep five-, three- and one-year warranty descriptions on their respective products and obtain applicable terms rather than transferring the longest term across the range.
Send a Composite-Covering Supply Brief
Send the selected composite and design with format, listed thickness and the requested carton, unit or piece quantity. Add wall dimensions, substrate, lighting, cleaning requirements, destination and any specific performance documents. Obtain units per carton for the gold covering and the carton configuration for the PET tile. Relia Wallpaper can then address an identifiable finished product and buying unit.
Send Your Glossy Composite Shortlist
Email the chosen PVC/IXPE or PET/IXPE reference with its actual design, format and quantity unit. Include the intended wall, finish and cleaning expectations, destination and carton information needed, so the sample and supply reply describe the complete composite you want to buy.
Send these details with your enquiry
- Actual composite and selected design with face, foam, format and thickness.
- Wall dimensions, substrate, intended lighting and required care conditions.
- Quantity per design, destination and the missing units-per-carton or carton configuration.
- details
- Qingdao Relia wallpaper Co., Ltd.
- details
- Shuyuan Road, Qingdao, Shandong, China
- details
- [email protected]
- details
- +86 18561762631
- details
- 14042030971