Source Size-Adjusted Wood-Look Foam Grille Rolls
For a wood-look foam grille that needs a different size, start with the selected standard product and a dimensioned change. Both smooth vinyl/PE-foam references explicitly accept size customization from 60 × 300cm. Compare standard cutting with the requested width and length, keep the wood pattern and direction fixed, and obtain the new per-design quantity and packing basis before ordering.
| Existing basis | Explicit source |
|---|---|
| Construction | Vinyl +PE foam; smooth |
| Standard size | 60 × 300cm |
| Size service | Accept size customization |
| New dimensions | Product-specific request; not yet an offer |
Start with a Defined Vinyl and PE-Foam Roll
At Relia Wallpaper, both selected vinyl/PE-foam grille references explicitly accept size customization from a standard 60 × 300cm roll. They have a smooth surface and self-adhesive installation, with waterproof, oil-proof, mould-proof and moisture-proof descriptions. Choose the actual catalogue wood pattern and sample first. Neither reference states a thickness here; the requested size and its supply conditions need a product-specific offer.
State the Width and Length You Need
Put the standard and requested width and length side by side, using one unit throughout. Mark the top edge, installation direction and quantity for each design. Changing width cuts across one axis; changing length cuts along the other. Neither automatically rescales the wood pattern. Identify any requested graphic change separately, and obtain the available size range and measurement tolerance with the offer.
| Dimension schedule | Required input |
|---|---|
| Standard | 60cm width × 300cm length |
| Requested | Width × length in one unit system |
| Orientation | Upward edge and grille direction |
| Quantity | Rolls for each size and design |
| Acceptance | Proposed measurement/tolerance for reply |
Dimensional path: identify the standard roll → mark width and length axes → assess the new edge relationship → approve the offered format.
Compare the Second Wood-Grain Reference
Choose the second wood-grain reference by its actual catalogue image, rather than treating similar wood names as a match. Compare colour, line spacing and grain scale beside the first sample. Draw the proposed boundaries on a continuous wall: a new width may place a decorative line differently at the edge. Include adjacent samples or a layout preview when that join matters.
Keep the Grille Direction with the Selected Pattern
Keep width direction separate from the length of the roll. Mark which edge runs vertically on the wall and whether the grille pattern should continue through adjacent lengths. The 60cm dimension is a supply width, not proof that the visible line pattern repeats every 60cm. If matching across joints matters, request the actual pattern information and assess adjacent samples. Do not stretch the artwork to fill a new width without approving the changed proportions. The dimensional request should preserve the selected appearance unless the buyer explicitly wants a redesigned scale.
- Select actual catalogue wood pattern
- Mark roll width and length axes
- Place adjacent lengths on wall drawing
- Check visible edge and pattern relationship
- Approve whether scale stays unchanged
Compare Resizing with the Standard-Format Layout
Compare resizing with standard cutting using the same wall. For an illustrative 2.24m-wide × 2.80m-high area, four standard 60cm × 300cm rolls provide 7.20m² of nominal material. The wall is 6.272m², leaving 0.928m² of geometric excess before considering pattern position and real cutting. A hypothetical 56cm × 280cm format would total the same 6.272m² across four rolls, but leaves no trimming allowance. This is a requested comparison, not a confirmed custom size or installation recommendation. Custom pricing, minimums, edge finish and actual tolerances may outweigh the apparent material saving.
| Illustrative 2.24 × 2.80m wall | Nominal material |
|---|---|
| Four 60 × 300cm standard rolls | 7.20m² |
| Wall area | 6.272m² |
| Geometric excess | 0.928m² before actual cutting |
| Hypothetical four 56 × 280cm rolls | 6.272m²; no trim allowance; not confirmed supply |
Retain the Smooth Decorative Surface
If the task is resizing, keep the selected smooth finish and wood image unchanged. Use the proposed sample to check its measured dimensions and cut edges. Ask the offer to describe any change in rolling or packing caused by the new format. A request for different foam thickness, adhesive or surface treatment is additional development, rather than part of the stated size-customization field.
Reconfirm the Per-Design Order after the Size Change
For both standard references, the minimum is five cartons, equal to 120 rolls per design. At 60 × 300cm, those rolls contain 216m² nominally. A new size may change rolls per carton and the commercial minimum. Compare each offer using the actual dimensions, rolls per design, rolls per carton and total cartons together; the word carton alone is not a comparable quantity.
| Standard order basis | Known conversion |
|---|---|
| 5 cartons per design | 120 rolls |
| Standard roll | 1.8m² nominal |
| 120standard rolls | 216m² nominal |
| Resized offer | New rolls/carton, cartons and minimum to be stated |
Approve One Dimensioned Product Reference
Approve one dimensioned reference before committing to the bulk quantity. Record selected catalogue image, material, requested width and length, pattern direction, edge treatment and any agreed measurement tolerance. Link the physical sample or accepted dimensional drawing to the quote revision. At receipt, compare measured dimensions and the visible pattern against that same version, using the agreed method. A different grain selection or a shortened roll should not be accepted as the same item merely because the total square metres on the packing list are similar.
Send the Standard Reference and Requested Change
Send the selected product image with a standard-versus-requested size table, wall drawing and pattern direction. State rolls per design and whether the standard format is an acceptable alternative. Compare the two offers for supplied quantity, packing, sample scope, price and delivery terms. That makes reduced site cutting a measurable purchase choice rather than an assumed saving from a smaller roll.
Specify the Grille Size You Need
Send the selected wood-pattern reference with its standard 60 × 300cm size and your requested width and length. Include orientation, rolls per design and the standard-format alternative you would accept, so the offer can compare material use, packing and custom terms on the same wall drawing.
Contact Qingdao Relia wallpaper Co., Ltd. Address: Shuyuan Road, Qingdao, Shandong, China.
Phone: +86 18561762631. Email: [email protected].
WhatsApp: 14042030971.
Send these details with your enquiry
- Selected catalogue wood image and requested width × length.
- Wall drawing, pattern direction and rolls required per design.
- Acceptable standard alternative and required sample or dimension tolerance.
- Choose the catalogue appearance
Retain the actual grain and smooth surface.
- Mark the dimensional change
Width, length or both, in one unit system.
- Compare the cut layouts
Keep pattern edges and trim allowances visible.
- Request the resized offer
State rolls per design and packing needs.