Decorative Rolls and Murals for Exhibition Board Facings
For exhibition boards, buy the facing from the finished cut size and artwork layout. Use the 122cm decorative roll when a broad board should have fewer covering joins, the 45cm patterned roll where its joins suit the design, or a ready mural where the complete image fits. Add edge returns before comparing roll yield and per-design carton commitments.
A Board Schedule Needs the Finished Cut Size
Relia Wallpaper's China-based factory business offers all three facing routes with online technical support. List each board's visible width, height and quantity, actual finish, openings and fixing points. Add developed edge returns and trimming as separate dimensions; supporting boards and stand structure remain project items.
Illustrative board: 110 × 220cm with 3cm developed allowance at each edge gives a 116 × 226cm cut rectangle. Replace those example allowances with the accepted edge detail before finalising the order.
The Narrow Patterned Roll Introduces Facing Joins
The Brown stripes/plaid product is self-adhesive PVC, 45cm × 10m with 0.1mm stated thickness. It offers waterproof, moisture-proof and mould-proof functions. Three nominal 45cm strip widths span the example 116cm cut width, introducing covering joins within a board.
Choose this route when the actual pattern and those joins suit the display. Mark direction and border details before allocating offcuts so each reused strip presents an accepted part of the design.
A Board Joint and a Covering Join Are Different
Draw structural board joints as one set of lines and decorative covering joins as another. The 122cm roll can span the example 116cm cut width nominally, leaving 6cm across the width before any usable-width restriction. The 45cm route needs multiple widths; that affects the visible pattern as well as the cut count.
If the artwork crosses several boards, retain the board gaps and assembly sequence in the image plan. A single covering piece across a board face does not make the joints between boards disappear. Decide where the important visual subjects should sit relative to both kinds of interruption.
| Layout element | Example comparison | Design consequence |
|---|---|---|
| Board cut width | 116cm including example returns | Confirm actual usable width |
| 122cm roll | 1 nominal width; 6cm remainder | No internal width join in this example |
| 45cm roll | 3 nominal strip widths | Covering joins inside each board |
| Board-array joint | Separate structural position | Place artwork around its visible interruption |
A Ready Mural Is a Whole-Image Route
Choose the gold-silver floral mural when the complete image is the display subject. It is a self-adhesive IXPE/PET covering with a glossy face, 120 × 240cm format and 2.3mm listed thickness. Its large flowers need an approved crop and division plan.
The mural includes fluorescent effect and waterproof, moisture-proof, mould-proof, anti-static, sound-absorbing, soundproof, fireproof, smoke-proof and heat-insulating functions. Review print and gloss under the display light and obtain the relevant evidence for any specified exhibition classification.
Approve the Image Across the Board Array
Overlay the full 120 × 240cm image with visible board rectangles, gaps and developed returns. Number the cuts and mark flowers that stay on one board, cross a gap or fall outside the crop. Approve that complete layout before cutting.
UV light cures printed ink; the board layout separately determines where the artwork is divided. Where possible, place divisions away from important flowers. A new composition or different image division should be quoted as a specific artwork request.
- Use the complete source artwork
- Overlay visible board faces and gaps
- Add returns outside the visible field
- Mark focal subjects, crops and interruptions
- Approve the complete layout before cutting
Trial the Board Finish and the Finished Edge
Use a piece of the actual board and coating for the sample, including an edge or corner where the facing will turn. Evaluate bonding and the accepted finish after the intended handling sequence. Resolve loose coating, surface dust and visible defects before interpreting a trial as a material result.
General wallcovering preparation guidance addresses repair and contamination before installation. Apply that principle with the chosen product's instructions rather than a universal adhesive recipe. If the display tours, also define dismantling, transport and storage conditions; self-adhesive does not establish clean removal or a reuse count.
| Trial detail | Record |
|---|---|
| Receiving face | Actual board and coating |
| Edge | Developed return and corner shape |
| Handling | Assembly, dismantling and storage needs |
| Acceptance | Face, edge and bond observations |
A Worked Wide-Roll Cut Schedule
For twenty illustrative 116 × 226cm rectangles, one across a nominal 122cm roll uses 2.26m per board. Twenty cuts require 45.2m before pattern alignment, end loss and extra allowances. Assess a 50m roll against those actual conditions before treating it as finished-board yield.
The marble-effect reference is 122cm × 50m self-adhesive PVC/vinyl with peel-and-stick installation, waterproof, moisture-proof, mould-proof and anti-static functions. Its chosen vein direction forms part of the accepted cut plan.
The Facing Need and Minimum Order Are Separate
Under the same simplified 226cm cut-length assumption, a 10m narrow roll yields four full lengths. Three strip widths per board across twenty boards require 60 lengths, or fifteen rolls before pattern loss. Its actual minimum is 30 rolls, so the purchase may exceed this example's cut need.
The wide roll starts at one roll per design; the mural starts at five cartons per design. Murals per carton are not stated. Wallpaper plastic-film packing does not provide a carton count. Keep these distinct order conditions visible instead of comparing only the nominal display area.
| Facing route | Illustrative need or basis | Listed minimum |
|---|---|---|
| 45cm ×10m wallpaper | 60 lengths ÷4=15 rolls before pattern loss | 30 rolls |
| 122cm ×50m film | 20 cuts ×2.26m=45.2m | 1 roll/design |
| 120 ×240cm mural | Complete artwork allocation | 5 cartons/design; contents needed |
An Exhibition RFQ with a Reproducible Facing Plan
Send the board list, array drawing, actual receiving finish and selected material images. Include visible dimensions, developed edge allowances, pattern direction, permitted covering joins and any complete-artwork crop. State the number of boards and your calculated roll or mural requirement separately from the product minimum.
All three products provide online technical support. Request any cutting, artwork assistance or packing allocation explicitly, with destination and dates. The reply should identify the facing product and supplied format while keeping stand structure, site assembly and unconfirmed services outside the material assumption.
Send the Board and Artwork Cut Schedule
Send the board schedule, chosen facing and artwork overlay to Qingdao Relia wallpaper Co., Ltd. Include developed edge allowances, cut direction and quantities so the material offer can follow the actual display. Our address is Shuyuan Road, Qingdao, Shandong, China. Email the drawings or use a direct contact link below.
Send these details with your enquiry
- Board schedule with visible faces, developed returns and actual receiving finishes.
- Selected facing, direction, structural gaps and approved artwork crop or numbered divisions.
- Calculated cut demand, actual purchase quantities, requested services and destination.
- Includes
- Board faces, returns and finished cut sizes · Chosen roll or full mural and artwork divisions · Quantities, handling requirements and destination
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971