Self-Adhesive Wall Coverings for Rental Turnovers
For rental turnovers, shortlist the covering your team can handle consistently on the actual apartment walls. Choose 45cm PVC rolls for repeated strips, 60cm foam grille rolls for a broader directional face, or 50cm adhesive PVC panels for a square layout. Trial the complete work sequence, then allocate the appropriate minimum across your apartment programme.
Three Formats Create Different Work Sequences
Relia Wallpaper's China-based factory business offers all three self-adhesive formats with online technical support. The 45cm × 10m PVC wallpaper creates repeated strip joins; the 60 × 300cm foam grille changes long-piece handling; the 500 × 500mm textured PVC panel creates individual positions and borders.
Trial a recurring wall with its actual corner, socket and finish. Record the handling steps for each candidate so the preferred format follows your team's work rather than an assumed installation-time advantage.
| Format | Actual product | Work to compare |
|---|---|---|
| 45cm × 10m roll | Self-adhesive PVC wallpaper | Strip alignment and repeated joins |
| 60 × 300cm roll | Vinyl/PE-foam grille | Long-piece handling and direction |
| 500 × 500mm piece | Textured PVC panel | Individual positions and borders |
A Narrow Roll for Repeated Apartment Walls
The narrow grille-effect product is self-adhesive PVC wallpaper with a wood-grain decorative appearance. It is waterproof, moisture-proof and mould-proof, with apartment, hotel, home-office and bedroom uses.
Illustrative 1.8m wall width needs four nominal 45cm strips. At an assumed 2.5m cut length, one 10m roll supplies those four lengths before pattern loss or extra trim. Allocate the roll from the accepted cuts rather than its 4.5m² nominal area alone.
Trial the Whole Turnover, Including Wall Readiness
Record the trial from the existing wall through assessment, cleaning, repairs, cutting, application, edge finishing and clearing. Separate repair time from application time and record the local requirements before the apartment returns to use.
The adhesive contacts the actual receiving layer. Resolve dust, loose paint and other weak areas through the selected preparation instructions, then inspect the finished edges. Peel-and-stick simplifies one application task; ventilation, odour and occupancy conditions still follow the actual product and site.
- Record the existing coating and defects
- Complete the selected preparation
- Cut and apply the trial covering
- Inspect corners, joins and perimeter
- Record clearing and local room-release requirements
The Purchase Minimum May Exceed One Property's Need
The narrow roll starts at 30 rolls and is packed 30 rolls per carton. The foam grille requires five cartons, equivalent to 120 rolls per design. The panel starts at 50 pieces, with carton contents not stated. These minima apply to different units and cannot be pooled into one small apartment package.
For an illustrative ten-apartment run using one narrow roll per selected wall, the calculated use is ten rolls but the listed purchase minimum remains 30. Identify where the other 20 rolls will go or obtain an actual alternative order offer. Do the same allocation before adding several grille designs to the assortment.
| Reference | Listed minimum | Known packing | Allocation issue |
|---|---|---|---|
| 45cm PVC wallpaper | 30 rolls | 30/carton | Example: 10 used versus 30 minimum |
| Foam grille | 120 rolls/design | 5 cartons = 120 rolls | Allocate by selected design |
| 50cm PVC panel | 50 pieces | Not stated | Count layout before buying |
The Foam Grille Is Its Own Material Choice
The smooth wood-pattern grille combines vinyl and PE foam with peel-and-stick installation. It is waterproof, oil-proof, mould-proof and moisture-proof, and accepts size-customisation enquiries. A standard 60 × 300cm roll has 1.8m² nominal face area.
In the example 1.8m-wide field, three 60cm widths span the wall. At 2.4m height, each 3m roll supplies one full-height piece before the actual trim and pattern requirements. This gives a different room allocation from the 10m narrow roll.
Build Room-Type Cut Sheets Before Distributing Stock
Group apartments by repeated wall geometry, not only by floor area. For each type, record wall width/height, openings, chosen design, cut lengths and pieces intended as reserves. Mark direction on cut pieces so a crew does not rotate a striped grille or wavy panel simply to use an offcut.
Use those cut sheets to distribute stock from the purchase quantity. Room labels, small bundles and property-specific packing are tasks to allocate between your warehouse, contractor and supplier. They are not included merely because a listing provides a carton count.
The Square Panel Changes the Border Layout
The textured PVC panel is self-adhesive with easy-DIY installation described. It lists 1mm material thickness and 1.2–1.5kg/m² technical areal mass. Measure its full wavy profile where the panel meets a trim.
For an illustrative 1.8 × 2.4m wall, nominal 50cm squares give four columns by five rows: 20 visible positions with border cuts. A cut-reuse plan determines whole panels consumed. Trial the perimeter and receiving finish before repeating the allocation across apartments.
Product Terms Stay with the Correct Reference
All three products list online technical support. The narrow wallpaper additionally lists graphic design, cross-category consolidation and OEM/ODM availability. Its Warranty field is N/A, so the applicable terms need an actual reply. The foam grille and textured panel each list one year; neither term should be transferred to the narrow roll.
The panel's ordinary features include anti-static, waterproof, moisture-proof, mould-proof, fireproof, flame-retardant and heat-insulating descriptions. State any classified requirement separately. For a rental business, also identify removal and existing-coating requirements without assuming a self-adhesive label means clean removal after tenancy.
| Product | Warranty information | Extra sourcing information |
|---|---|---|
| 45cm PVC wallpaper | N/A; obtain applicable terms | Graphic design; consolidation; OEM/ODM |
| Foam grille | 1 year | Graphic design; size customisation |
| Textured PVC panel | 1 year | Graphic design; self-adhesive |
A Turnover RFQ Based on the Trial and Room Schedule
Send the apartment types, actual receiving finishes and selected product links with a room-by-room cut or panel schedule. State the opening quantity for each design, cartons required and material retained for later rooms. Include the trial's application and room-release requirements as project constraints, not as an assumed supplier time guarantee.
Request samples, product-specific instructions and the actual supply/packing offer against those quantities. The buying decision should show which format your team accepted, how it will be distributed and what remains unresolved before ordering in volume.
Send Your Apartment-Type Material Schedule
Send the trialled covering, repeated apartment wall sizes and room allocation to Qingdao Relia wallpaper Co., Ltd. Include the receiving finish and material quantity for each design so the offer follows your actual programme. We are at Shuyuan Road, Qingdao, Shandong, China. Use the direct links below to send the turnover brief.
Send these details with your enquiry
- Trialled product and design, apartment types and actual receiving finishes.
- Cut lengths or panel-position sheets, installation quantities and retained stock by design.
- Required cartons, room allocation, destination and local room-release constraints.
- Includes
- Trialled format and actual wall finish · Apartment types and cut or panel quantities · Design allocation, destination and dates
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971