Source Embossed Wood-Look Adhesive Flooring by Surface Reference
For a visibly textured wood-look floor, compare products that explicitly state embossing. Our PVC plank references use 91.4 × 15.2cm faces, currently selectable 1.5mm gauges and 36-piece cartons. Judge print, relief and sheen on the same sample, then keep that approved finish with the exact option and quantity; a 2mm requirement needs its own supply assessment.
| Purchase priority | Useful comparison |
|---|---|
| Printed grain | Colour, motif scale and repeat appearance |
| Physical texture | Relief, feel and light response |
| Supplied product | Material, gauge, option and carton unit |
Begin with a Surface You Can Identify
Relia Wallpaper can discuss the selected embossed surface using these actual PVC plank references. All use91.4 ×15.2cm faces and36-piece cartons. The renovation and wood-grain entries list1.5mm; the removable entry also describes1.5/2mm but currently selects1.5mm.
Choose the actual named or numbered appearance and request that sample. An option number is not a colour description or an emboss-depth specification.
Compare Grain and Texture as Separate Observations
Printing supplies the visible grain; embossing creates physical texture. Compare colour and print under diffuse light, then use low-angle light and touch to examine relief. If the relief must follow the printed grain, inspect that relationship on the sample. Embossed wording alone does not establish registered embossing or a measured texture depth.
| Observation | Sample method | Decision record |
|---|---|---|
| Diffuse light on several faces | Selected grain image and colour | |
| Relief | Low-angle light and touch | Accepted visible/tactile character |
| Print/relief relationship | Compare the same face | No assumed registered embossing |
Process distinction: printed grain is a visual layer; embossing is physical texture; their registration must be evaluated on the selected sample.
A Warm Wood-Look Direction for Interior Floors
Lay several pieces in the proposed direction and look from the entrance. Check repeated motifs, tone and the relationship to furniture. Use samples from the product being quoted. This helps you choose the right floor field rather than an attractive close-up, and does not present the illustrative room as a completed customer project.
Fix the Plank Specification Alongside the Finish
Keep the approved surface linked to face dimensions, material, thickness and the actual option label. The three references share a nominal 91.4 × 15.2cm footprint, but the removable reference’s broader 2mm description does not establish a currently selectable 2mm combination. If 2mm is needed, request it as a separate supply condition and review a corresponding sample. Otherwise, order the actual 1.5mm selection. Include transitions and finished levels in the room brief so a gauge change does not enter the order as an apparently harmless substitution.
| Reference | Actual selected gauge | Other source detail |
|---|---|---|
| 19452 | 1.5mm | Wood/Marble and numbered appearances |
| 19712 | 1.5mm | Named/numbered wood-grain references |
| 19721 | 1.5mm currently | 1.5/2mm broader description; 2mm separately requested |
Choose Features for the Actual Use
The listed ordinary features remain useful: waterproof, eco-friendly and self-adhesive across the references, with wear-resistant wording on the renovation and wood-grain entries and anti-scratch wording on the removable entry. These descriptions do not turn visible embossing into a slip rating or a quantified wear class. For an apartment or interior renovation, match the ordinary product route to the room conditions; where a contract calls for a measured classification, identify the exact requirement. Avoid comparing two unmeasured surfaces using an invented better-grip or longer-life ranking.
A Further Embossed Reference for Colour Selection
Compare colour candidates against the same adjoining finish and lighting. Keep the physical sample for texture and sheen, with its product link, option and gauge. A photograph helps identify the choice but does not replace that reference. Agree the actual sample size, availability and cost in the offer.
Build the Quantity Request from 36-Piece Cartons
Convert the chosen product into pieces before rounding cartons. One nominal plank covers 0.138928m²; 36 pieces represent 5.001408m². An illustrative 30m² net area divided by that carton area is just under six cartons, but six cartons leave almost no allowance beyond the geometric area. The row drawing, end cuts and spare plan can therefore change the purchasing quantity. If the completed cut schedule calls for 230 pieces, seven cartons supply 252 pieces. This example shows why texture approval and quantity planning must remain connected to the same selected plank.
| Illustrative quantity | Calculation |
|---|---|
| One plank | 0.914 × 0.152 = 0.138928m² |
| 36-piece carton | 5.001408m² nominal |
| 30m² geometric area | Almost six cartons before cuts/spares |
| 230-piece cut schedule | 7 cartons = 252 pieces |
Keep an Agreed Finish Reference for the Bulk Order
Set receipt checks around the surface you approved. Compare sampled pieces for grain image, relief appearance, sheen, face dimensions and edge condition using the agreed method. Where labels identify batches, keep those details with the cartons intended for the same continuous floor. Do not set an arbitrary percentage of acceptable variation after delivery; identify the acceptance basis during the order. Keep installation preparation separate as well. An accurately supplied embossed finish cannot compensate for an unstable or contaminated floor underneath it, so obtain the chosen product’s application guidance before work begins.
Bring the Texture Decision into Your Enquiry
Send the actual product and option, required gauge, room drawing and target pieces or cartons. Attach the approved finish reference and state whether print, relief or both drive the choice. Ask for the applicable minimum and any nonstandard-gauge terms, so the sample and quantity refer to the same product.
Select the Texture for Your Plank Order
Share the exact embossed-flooring reference, preferred appearance and required gauge. Attach your piece or carton target and describe which grain, relief or sheen characteristic drives the choice, so the sample and bulk enquiry address the same surface.
Contact Qingdao Relia wallpaper Co., Ltd. Address: Shuyuan Road, Qingdao, Shandong, China.
Phone: +86 18561762631. Email: [email protected].
WhatsApp: 14042030971.
Send these details with your enquiry
- Product link, exact design option and required gauge.
- Approved sample and the print or relief priority.
- Room drawing, pieces or cartons and receiving destination.
- Identify the printed grain
Attach the actual design reference.
- Assess the physical texture
Compare relief and sheen on a sample.
- Freeze the selected format
Keep gauge and 91.4 × 15.2cm face together.
- Request the carton offer
State design quantities and sample scope.