Geometric PVC Panels for Relief-Led Interior Schemes
For a wall with physical geometric relief, choose the shape first and compare thickness second. Start with the ornamental panel for curved motifs, the black panel for a rectangular rhythm, or the self-adhesive wavy option for texture. All are nominally 50cm square; use an adjoining sample pair to settle the profile and visible joint.
Thickness Labels and the Finished Profile
Relia Wallpaper's China-based factory supply range includes all three PVC designs, each with a 50-piece minimum and online technical support. The ornamental and black products list 0.8mm thickness; their measurement scope needs to accompany the sample. The wavy product explicitly lists 1mm material thickness.
Compare the outer footprint, stated thickness and maximum front-to-back profile as separate dimensions. Give the available clearance at trims or sockets so the finished shape can be selected for that detail.
| Reference | Source label | Listed value | Additional sample measurement |
|---|---|---|---|
| Ornamental relief | Thickness | 0.8mm | Measurement scope and full profile |
| Black geometric | Thickness | 0.8mm | Measurement scope and full profile |
| Wavy textured | Material Thickness | 1mm | Maximum complete projection |
Ornamental Relief for a Repeated Decorative Field
Choose the 50 × 50cm ornamental PVC panel when the wall calls for curved embossed-relief motifs. Its repeated pattern produces a different visual rhythm from the black rectangular design.
Place two samples in the planned direction. Inspect where curves reach the boundary, how the border reads and how rotation changes the pair. Retain the accepted orientation on the elevation.
A Sample Record That Captures Physical Relief
Use a complete sample and an adjoining piece. Photograph the front, back, edge and joint; measure the profile against a straight reference plane with the ruler in the dimension being recorded. Keep maximum projection separate from the stated thickness and identify the measurement positions.
In general sheet thermoforming, softened plastic takes a tool's shape before trimming. This helps explain the distinction between sheet thickness and decorative projection; the actual sample establishes the supplied panel's shape and required trim clearance.
- Identify the exact supplied design
- Photograph the complete front and edge
- Measure the agreed full-profile positions
- Place a second sample in the intended direction
- Retain the ruler views and accepted joint
The Wavy Self-Adhesive Option
The white wavy PVC panel is 500 × 500mm, textured and self-adhesive, with easy-DIY installation described. Its technical areal mass is 1.2–1.5kg/m². Multiplying by the nominal 0.25m² face gives approximately 0.30–0.375kg per panel as an illustrative calculation, rather than a measured piece weight or fixing-load result.
Choose it for the wavy appearance and stated mounting route, then trial the actual receiving finish before allocating a large wall.
Evaluate the Relief Under the Room Lighting
Place the samples where the room's light strikes from the intended direction and inspect them from the normal approach. A geometric relief seen front-on can read differently under a wall washer or side light. Compare the shadow rhythm, exposed perimeter and joint together before choosing the field size.
The ornamental and black panels include waterproof, moisture-proof, mould-proof, fireproof, sound-absorbing, soundproof and anti-scratch features. The wavy panel adds anti-static, flame-retardant and heat-insulating descriptions to its own functions. Keep any required classified fire or measured acoustic result attached to the selected product.
A Worked Layout Separates Wall Need from MOQ
Illustrative rectangular wall: 3.0m wide × 2.5m high, with no openings and nominal 0.5m squares. Six columns × five rows gives 30 panel positions and 7.5m² of face area before joints, cuts or spares. Each candidate's minimum is 50 pieces, so the order minimum exceeds this example's field by 20 pieces.
Identify whether those extra pieces serve additional walls or retained stock. Confirm actual dimensions and fixing before turning the nominal grid into a cutting list. General preparation guidance also makes the condition of the receiving surface part of the installation decision.
- details
- Example wall: 3.0 × 2.5m · Nominal grid: 6 columns × 5 rows · Field: 30 positions / 7.5m²
- details
- Product minimum: 50 pieces · Difference: 20 pieces before spares · Actual cuts, joints and fixing remain project-specific
Black Rectangular Forms Need Their Own Joint Approval
The black panel's offset raised rectangles create a linear, contrasting field. Select that particular design when it suits the room rather than treating it as a black version of the ornamental or wavy panel.
Place the sample beside skirting, furniture and edge trims. Mark the first full panel and neighbouring directions, then review any visible corner or termination from the entrance.
Piece Counts, Cartons and Product Support
The ornamental and black geometric boards each have a 50-piece minimum and 50 pieces per carton. The textured wavy panel also starts at 50 pieces, but its carton count is not stated. Keep that packing field open rather than borrowing the other products' count.
All three list a one-year warranty and online technical support. Project-solution capability is listed for the ornamental and black references; graphic design is listed for the wavy panel. These are useful support routes, while the actual fixing detail and supplied sample remain tied to the selected reference.
| Panel | Minimum | Packing | Specified support |
|---|---|---|---|
| Ornamental relief | 50 pieces | 50/carton | Online support; project solutions |
| Black geometric | 50 pieces | 50/carton | Online support; project solutions |
| Wavy textured | 50 pieces | Not stated | Online support; graphic design |
An RFQ Built Around the Chosen Profile
Select one design as the primary offer and list alternatives separately. Provide the wall elevation, proposed 50cm grid, selected colour reference, required piece count and destination. Add the thickness label exactly as supplied, the maximum profile measurement needed for adjacent trims and the sample/joint record you want returned.
Ask for the preparation and attachment instructions for the actual substrate, plus carton contents for the chosen line. That reply lets you compare a complete decorative-panel offer instead of ranking three products by an incomplete millimetre value.
Send the Profile and Wall Layout
Send your preferred geometric design, wall drawing and required trim clearance to Qingdao Relia wallpaper Co., Ltd. Include installation pieces and reserve stock separately so the selected panel can be discussed against its own minimum and packing. Find us at Shuyuan Road, Qingdao, Shandong, China, or use a direct contact link below.
Send these details with your enquiry
- Primary design, selected colour reference and measured wall grid.
- Stated thickness label, required complete profile and accepted joint sample.
- Installation pieces, retained stock, actual receiving finish and destination.
- Includes
- Primary panel and accepted orientation · Wall grid and required complete profile · Installation pieces, spares and destination
- address
- Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- phone
- +86 18561762631
- Whats App
- 14042030971